English Arabic Chinese (Simplified) French German Greek Italian Polish Portuguese Russian Spanish
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +44 (0) 161 877 2334

Multi-Functional Scale & Corrosion Inhibitor with Anti-Foulant - Baton

Multi-Functional Scale & Corrosion Inhibitor with Anti-Foulant - Baton

Accepta 6010 is a high performance, highly concentrated solid chemical cooling water treatment based on the very latest anti-scaling, anti-fouling and corrosion inhibition technologies. It is scientifically formulated for the treatment and protection of cooling water systems operating under “corrosive” water conditions.

Accepta 6010 inhibits the corrosion of ferrous metals using both cathodic and anodic protection; it also incorporates copper corrosion inhibitors.

Accepta 6010 comprises a small solid chemical baton (0.36kg) wrapped in a water soluble bag. It is designed to treat open cooling tower water systems during system start-up, and helps to achieve a suitable inhibitor concentration during this stage.

Accepta 6010 is also a good “catch up” solution for cooling systems that have lost water or where the inhibitor feed has been absent for some time. It is also good for use in small cooling systems where metering of the inhibitor into the system is not practical.

Accepta 6010 contains PBTC phosphonate, HEDP phosphonate, Versaflex One, Ter-polymer, HPA, POCA and triazole.

Accepta 6010 is packaged in cases containing 30 x 0.36kg water soluble bags, each bag being enclosed in a sealed cardboard tube.

Each case weighs 10.9kg.

Product Benefits

  • Innovative solid chemical technology
  • Small, light weight handy baton sized treatment product
  • Excellent "catch-up" solution
  • Ideal for smaller systems
  • High performance multi-functional scale and corrosion inhibitor with an anti-foulant
  • Suitable for corrosive conditions
  • Provides system protection at low product dosage rates
  • Ferrous metal and copper corrosion inhibitors
  • Significant safety improvements
  • Easy to handle, simple to dose
  • Environmentally friendly
  • Reduces carbon footprint
  • Significant space savings

Product Properties

Appearance: Tan to brown amorphous solid
Odour: Slight characteristic odour
Softening point: 49 - 55 oC
Bulk density: 1098 kg/m3
Solubility in water: Complete but dissolves slowly
pH (1% solution): 8.0 – 9.0

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

The initial recommended application rate for Accepta 6010 is 50 ppm. The application rates provided below are based on the corrosive indices of particular waters, however in practice, rates should be set to suit individual water conditions.

Water Quality Range Dosage* Test Range
Ryzner Stability Index Calcium Alkalinity Chemical level in
recirculating water
(As Mo) 
6.0 - 6.5 <50ppm <100ppm 10 - 25ppm 2 - 4ppm 0.5 - 1.0ppm
6.5 - 7.5 25 - 40ppm 4 - 6.5ppm 1.0 - 1.6ppm
7.5 - 8.5 40 - 50ppm 6.5 - 8ppm  1.2 - 2.0ppm

* Each baton of Accepta 6010 yields 25 ppm of product when added to 15.2m3 of system volume/water.

Testing and Control

Organo-phosphonate specific test kits suitable for monitoring and controlling the use of Accepta 6010 are available from Accepta.


When dosed into a cooling system, operators should attempt to find a high flow area in the sump of the cooling tower or inside an accessible make-up tank. Please note that product dissolution rates will vary depending upon water composition, temperature and flow rate.

It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.

For further technical assistance concerning Accepta 6010 please contact Accepta.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for Accepta 6010 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link:

Safety Data for Accepta 6010

Popular Solid Chemical Treatment Products

World Class Expertise

Accepta work with industry worldwide delivering practical, cost effective solutions to resolve complex problems. If you require technical assistance, or information about our water treatment chemicals and other speciality products, please contact our dedicated technical support team on:

+44 (0) 845 519 89 90 or complete our Technical Support form.

Expert Training

Develop your skills with our internationally recognised water and wastewater treatment training courses. Delivered by world leading industry experts and designed for engineers, facilities managers and environmental professionals... water treatment training.

Keep upto date with our extensive library of good practice guides, latest research, regulatory updates, news and more... knowledge base.

Custom Chemical Manufacturing

Accepta offer custom chemical manufacturing, specialist toll blending and white label production services for our own water treatment chemicals and client specific formulations to UK and international customers.

To discover how you could benefit from our environmentally sensitive, quality driven chemical manufacturing capabilities please call us on +44 (0) 161 877 2334 or contact us.

International Distributor Opportunities

Accepta's innovative, quality driven customer focused business model creates exciting global supply chain and distributor opportunities for established and ambitious businesses currently active within the water treatment, wastewater treatment and environmental services sectors around the world.

If you are interested in becoming an exclusive international distributor of Accepta water treatment technologies please click here to learn more.