Accepta 2894 is a high performance phosphate based scale and corrosion inhibitor developed for the treatment of potable water systems and other once through water systems. It is suitable for both domestic and drinking water systems.
Accepta 2894 can be used in thermal treatment applications including pasteurisers and steriliser systems in the cooling section.
Accepta 2894 can also be used in both domestic and potable water systems up to 75°C to effectively prevent scaling and corrosion.
- High performance scale and corrosion inhibitor for potable water systems and once through systems
- Suitable for thermal treatment applications including pasteurisers and steriliser systems
- Suitable for both domestic and drinking water systems
|pH||15.5 - 6.5|
|Density:||11.24 - 1.28 kg/m3|
|Boiling point:||100 oC|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 2894 should be dosed continuously into the system at 10 to 30ppm.
This is most readily facilitated using a water meter controlled metering pump.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 2894 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2894 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: