Accepta 4438 is a high performance high molecular weight cationic polymer emulsion polyacrylamide based flocculant with a 35% charge. It scientifically formulated for use in effluent and wastewater treatment applications.
Accepta 4438 has a mole charge of 35%.
Accepta 4438 does not contain oil or surfactants.
Accepta 4438 is designed to flocculate suspended solids and is especially recommended for use in non potable raw water clarification, primary and secondary effluent clarification and oil waste water clarification.
- High performance high molecular weight cationic polymer emulsion polyacrylamide based flocculant
- Excellent for use in a range of effluent and wastewater treatment applications
- Contains no oil or surfactants
- Use to flocculate suspended solids
- Ideal for non potable raw water clarification
- Primary and secondary effluent clarification
- Oil waste water clarification
|Approx. bulk density:||1.2|
|Water solubility:||Completely miscible|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Please contact Accepta for the correct dosing procedure for Accepta 4438.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 4438 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: