English Arabic Chinese (Simplified) French German Greek Italian Polish Portuguese Russian Spanish
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +44 (0) 161 877 2334

Heavy Metal Precipitation Aid for Wastewater & Effluent Streams (High Charge, Very High Molecular Weight)

Heavy Metal Precipitation Aid for Wastewater & Effluent Streams (High Charge, Very High Molecular Weight)

Accepta 4900 is a high performance; sulphur based heavy metal precipitation aid scientifically formulated for the treatment and reduction of heavy metals in wastewater and effluent streams.

Accepta 4900 exhibits a high charge and very high molecular weight an can be used in conjunction with traditional chemical treatments to reduce the levels of heavy-metals in wastewater and effluent streams.

Accepta 4900 is an environmentally friendly heavy metal precipitation aid based on chelating agents with superior flocculating capabilities.

Accepta 4900 comprises a water-based solution, available ready-to-use without prior dissolution or expensive make-up equipment.

Ionic character: Anionic
Charge density: High
Molecular weight: Very high

The versatile molecular architecture of Accepta 4900 allows the formation of flocs adapted to any plant design.

Carry-over of flocs in overflows that would normally reintroduce heavy-metals back into the treated water are reduced and suppressed by the addition of flocculants and/or coagulants.

The large floc size that can be achieved using Accepta 4900 also ensures rapid settling and easy dewatering of the sludge.

Coagulant / flocculant usage rates can be reduced, and sometimes eliminated when the correct product grade is used.

The formation of a dense, compact sludge also helps to minimise disposal costs.

Accepta 4900 is effective against a wide range of metals and removes co-existing heavy-metals at the same time.

The chelating properties of the dithiocarbamate group allows the precipitation of complex or chelated metals. Chemically stable sludge is generated thereby avoiding any secondary pollution.

Areas of Application

Accepta 4900 is very effective in the treatment of effluents created from a wide range of sectors including:

  • Automotive industry
  • Mining industry
  • Chemical industry
  • Electronics industry
  • Electroplating industry
  • Iron and steel manufacturing
  • Leather factories
  • Metal processing
  • Photographic industry
  • Printing factories
  • Power stations
  • Refineries of non-ferrous metals
  • Solvent incinerators
  • Waste incineration facilities

Product Benefits

  • Highly efficient heavy-metal precipitation aid for wastewater and effluent streams
  • Versatile, can be used across many industry sectors
  • Can be used with traditional chemical treatments to reduce levels of heavy-metals
  • Removes co-existing heavy-metals
  • Environmentally friendly profile
  • Chelating agent with superior flocculating capabilities
  • Available ready-to-use without prior dissolution or expensive make-up equipment
  • Forms dense, compact sludge to minimise disposal costs        

Product Properties

Appearance: Reddish liquid
Ionic character: Anionic
Charge density: High
Molecular weight: Very high
Specific gravity: 1.05 - 1.15
Average Non-Volatile Solids (%): 20
pH: 9.0 - 12.0
Brookfield viscosity (cps): 30 - 500
Freezing point (°C): < -7
Storage temperature (°C): 0 - 30

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

For a stream without soluble complexes, Accepta 4900 should be added directly to the wastewater at a water pH of between 3 and 10. The dithiocarbamate functionality of the product reacts with the dissociated heavy-metal ion to form an insoluble complex and a floc will form.

The dosage of the chelating agent can be determined based on the composition of the water to be treated, the treatment already in place or a jar test.

When the pollution level is unknown, please contact Accepta for further technical assistance.

If necessary, a coagulant can be added to increase the size of the floc. To further enhance floc size and settling speed an anionic flocculant is sometimes added. A cationic polymer can also be used in specific cases.

To treat complexed heavy-metals in the wastewater please contact us for further technical assistance.

Accepta 4900 can effectively be removed from effluent discharges by filtering through activated carbon. This treatment is especially useful when excess product has been used to reduce soluble metals to very low levels.

It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for Accepta 4900 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link:

Safety Data for Accepta 4900

World Class Expertise

Accepta work with industry worldwide delivering practical, cost effective solutions to resolve complex problems. If you require technical assistance, or information about our water treatment chemicals and other speciality products, please contact our dedicated technical support team on:

+44 (0) 845 519 89 90 or complete our Technical Support form.

Expert Training

Develop your skills with our internationally recognised water and wastewater treatment training courses. Delivered by world leading industry experts and designed for engineers, facilities managers and environmental professionals... water treatment training.

Keep upto date with our extensive library of good practice guides, latest research, regulatory updates, news and more... knowledge base.

Custom Chemical Manufacturing

Accepta offer custom chemical manufacturing, specialist toll blending and white label production services for our own water treatment chemicals and client specific formulations to UK and international customers.

To discover how you could benefit from our environmentally sensitive, quality driven chemical manufacturing capabilities please call us on +44 (0) 161 877 2334 or contact us.

International Distributor Opportunities

Accepta's innovative, quality driven customer focused business model creates exciting global supply chain and distributor opportunities for established and ambitious businesses currently active within the water treatment, wastewater treatment and environmental services sectors around the world.

If you are interested in becoming an exclusive international distributor of Accepta water treatment technologies please click here to learn more.