Accepta 2612 is a high performance scale inhibitor additive for the treatment and protection of cooling water systems.
Accepta 2612 is scientifically formulated from a combination of polymers to offer excellent calcium carbonate along with general scale inhibition in cooling water systems, even under extreme system conditions.
Accepta 2612 is made up of halogen stable polymers that do not form insoluble calcium salts when added to hard waters.
- High performance cooling water scale inhibitor
- Effective under extreme conditions
- Excellent for problematic calcium carbonate
- Formulated using halogen stable polymers
- Ideal for hard water conditions
- Convenient liquid product
|Colour:||Clear to slightly hazy, pale yellow|
|pH:||8.5 - 9.5|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
The target dosage range is 3 - 5 ppm as PO4-3 in the recirculating cooling water.
Accepta 2612 should be fed continuously to an area of good mixing. The product may be fed directly or may be diluted with good quality water and fed from a chemical dosing tank.
Appropriate use of Accepta 2612 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Phosphonate Drop test - Thorium Nitrate titration
- Phosphonate UV photolysis + colour disc
Material of Compatibility
Safety, Storage & Handling
Accepta 2612 is an alkaline solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2612 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: