Accepta 1450 is a high performance inorganic primary coagulant based on trivalent iron (Fe 3+).
Accepta 1450 is scientifically formulated for use in drinking water applications, wastewater treatment and effluent treatment.
Accepta 1450 is effective over a wide pH range.
Accepta 1450 can be used as an effective odour control agent and will aid phosphorus removal. It can also be used as a sludge conditioning agent and will inhibit corrosion by controlling the formation of hydrogen sulphide.
- High performance primary coagulant
- Excellent for drinking water, wastewater treatment and effluent treatment applications
- Effective over a wider pH range
- Available in convenient liquid
- Chloride free
- Cost effective coagulant
- Excellent for the treatment of wastewater where low pH is required - removal of fats, oil and grease, high colour
|Ferrous sulphate (% w/w):||<0.8|
|Ferric Sulphate (% w/w):||40 to 42|
|Colour:||Brownish / red|
|Melting point/range:||-25 - -15 °C|
|Boiling point/boiling range:||103 - 108 °C|
|Density:||1.57 - 1.63 g/cm3 (15 °C)|
|Suspended solids (ppm):||<340|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
For application advice regarding Accepta 1450 please contact us.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 1450 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: