Accepta 6013 is a high performance, highly concentrated polymeric based soild chemical on-line cleaner and scale remover scientifically formulated for the treatment and protection of both cooling water systems and boiler water systems.
Accepta 6013 helps in the removal of scale build-up in cooling systems using the dispersion method (as opposed to acidic chelation).
Accepta 6013 is designed to supplement boiler and cooling system scale and corrosion inhibitors and offers an excellent alternative to the use of dangerous mineral acids.
Accepta 6013 is thermally stable and can be used in both boilers and cooling water systems.
Accepta 6013 contains two state-of-the art polymer compounds, Versaflex One and AR-540, both of which are combined in this proprietary solid formulation.
|Polymer vs Acid:||Improves use, handling and shipping safety|
|Eliminates exposure to hazardous chemicals|
|Eliminates risk of cleaning-related corrosion|
|No need for system shut-down:||Eliminates cost of down-time and start-up|
|Eliminates need for re-passivation|
|No need to raise system water temp to clean:||Energy savings|
|No spent acid:||Eliminates waste treatment and disposal cost|
Accepta 6013 is available in fully recyclable plastic bottles each containing 5kg of concentrated solid chemical.
Accepta 6013 is packaged in cases containing 4 x 5kg bottles.
Each case weighs 20kg.
- Innovative solid chemical technology
- High performancel on-line cleaner and scale remover
- Suitable for both cooling and boiler water systems
- Excellent alternative to the use of dangerous mineral acids
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||White amorphous solid|
|Odour:||Slight characteristic odour|
|Softening point:||49 - 55 oC|
|Bulk density:||998 kg/m3|
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||8.0 – 8.5|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Application rates for Accepta 6013 will vary from 20 - 2000 ppm in the system water depending on the severity of the scale/deposit build-up,
When cleaning heavily fouled systems care should be taken to prevent clogging of screens, strainers, and lines. Under such circumstances it may be advantageous to use Accepta 6013 in conjunction with a side stream filter.
Feed Accepta 6013 using an Accepta board system.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 6013 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 6013 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: