Accepta 6006 is a high performance, highly concentrated solid chemical multi-functional cooling water treatment, scientifically formulated using the very latest anti-scaling, anti-fouling and corrosion inhibition technologies.
Accepta 6006 is a highly effective cooling water treatment product developed for “stressed” conditions. It uses the very latest anti-scaling, anti-fouling and corrosion inhibition technologies.
Its scale dispersant and corrosion inhibitors work with conventional chemistry to provide system protection at low product dosage rates.
Accepta 6006 comprises a small solid baton (0.36kg) wrapped in a water soluble bag. It is designed to treat open cooling tower water systems during system start-up, and helps to achieve a suitable inhibitor concentration during this stage.
Accepta 6006 is also a good “catch up” solution for cooling systems that have lost water or where the inhibitor feed has been absent for some time. It is also good for use in small cooling systems where metering of the inhibitor into the system is not practical.
Accepta 6006 contains PBTC phosphonate, HEDP phosphonate, Versaflex one, Ter-polymer, HPA and triazole.
Accepta 6006 is packaged in cases containing 30 x 0.36kg water-soluble bags, each bag being enclosed in a sealed cardboard tube.
Each case weighs 10.9kg.
- Innovative solid chemical technology
- Small, light weight handy baton sized treatment product
- Excellent "catch-up" solution
- Ideal for smaller systems
- High performance multi-functional scale and corrosion inhibitor with an anti-foulant
- Provides system protection at low product dosage rates
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||Tan to brown amorphous solid|
|Odour:||Slight characteristic odour|
|Softening point:||49 - 55 oC|
|Bulk density:||1098 kg/m3|
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||7.0 – 8.0|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 6006 can be used in cooling tower water systems using the following dosage rates. The application rates provided below are based on set water stability indices, however in practice, dosage rates should be set to suit individual water conditions.
|Water Quality Range||Dosage||Test Range|
|Calcium||Alkalinity||Chemical level in
|6.0 - 4.0||200 - 500ppm||200 - 500ppm||10 - 25ppm||2 - 5ppm||0.75 - 2.0ppm|
|4.0 - 3.0||500 - 800ppm||500 - 600ppm||20 - 40ppm||4 - 8ppm||1.5 - 3.0ppm|
Each baton of Accepta 6006 yields 25 ppm of product when added to 14.4m3of system volume/water.
Testing and Control
Organo-phosphonate specific test kits suitable for monitoring and controlling the use of Accepta 6006 are available from Accepta.
When dosed into a cooling system, operators should attempt to find a high flow area in the sump of the cooling tower or inside an accessible make-up tank. Please note that product dissolution rates will vary depending upon water composition, temperature and flow rate.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 6006 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 6006 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: