Accepta 6062 is a high performance, highly concentrated polymeric based solid chemical treatment product scientifically formulated for the on-line cleaning and removal of scale in both cooling water and boiler water systems.
Accepta 6062 is an on-line cleaner and scale remover for both cooling and boiler water systems that helps to remove scale build-up in water systems using the dispersion method (as opposed to acidic chelation).
Accepta 6062 is designed to supplement boiler and cooling system scale and corrosion inhibitors and offers an excellent alternative to the use of dangerous mineral acids.
|Polymer vs Acid||Improves use, handling & shipping safety|
|Eliminates exposure to hazardous chemicals|
|Eliminates risk of cleaning-related corrosion|
|No need for system shut-down||Eliminates cost of down-time and start-up|
|Eliminates need for re-passivation|
|No need to raise system water temp to clean||Energy savings|
|No spent acid||Eliminates waste treatment & disposal cost|
Accepta 6062 is thermally stable and can be used in both boilers and cooling water systems.
Accepta 6062 contains two state-of-the art polymer compounds, Versaflex One and AR-540, both of which are combined in this proprietary solid formulation.
Accepta 6062 comprises a small (0.36kg) solid chemical baton wrapped in a water soluble bag. It is designed to clean-up boiler and cooling water systems whilst they are operational, and for small systems where metering of the inhibitor into the system is not practical.
Accepta 6062 is packaged in cases containing 30 x 0.36kg water-soluble bags, each bag being enclosed in a sealed cardboard tube.
Each case weighs 10.9kg.
- Innovative solid chemical technology
- High performance on-line cleaner and scale remover for cooling and boiler water systems
- Helps to remove scale build-up in water systems using the dispersion
- Supplements boiler and cooling system scale and corrosion inhibitors
- Excellent alternative to the use of dangerous mineral acids
- Thermally stable
- Small, light weight handy baton sized treatment product
- Excellent "catch-up" solution
- Ideal for smaller systems
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Appearance:||White amorphous solid|
|Odour:||Slight characteristic odour|
|Softening point:||49 - 55oC|
|Bulk density:||998 kg/m3|
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||8.0 - 8.5|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Application rates for Accepta 6062 contains two state-of-the art polymer compounds, Versaflex One and AR-540, both of which are combined in this proprietary solid formulation. will vary from 20 – 2000 ppm in the system water depending on the severity of the scale/deposit build-up,
When cleaning heavily fouled systems care should be taken to prevent clogging of screens, strainers, and lines. Under such circumstances it may be advantageous to use Accepta 6062 contains two state-of-the art polymer compounds, Versaflex One and AR-540, both of which are combined in this proprietary solid formulation. in conjunction with a side stream filter.
Each baton of Accepta 6062 yields 25 ppm of product when added to 14.4m3 of system volume/water.
When dosed into a system, operators should attempt to find a high flow area in the sump of the cooling tower or inside an accessible make-up tank. Please note that product dissolution rates will vary depending upon water composition, temperature and flow rate.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 6062 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 6062 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: