Accepta 6043 is a high performance, highly concentrated DEHA based solid chemical boiler water product scientifically formulated for the protection and treatment of condensate lines in steam boilers and steam generating plant.
Accepta 6043 has been developed to minimize corrosion in condensate lines using a DEHA oxygen scavenger and by balancing pH levels and is a triple component product based on a proprietary compound of morpholine, cyclohexylamine and DEHA amine.
Accepta 6043 is available in fully recyclable plastic bottles each containing 4.1kg of concentrated solid chemical.
Accepta 6043 is packaged in cases containing 4 x 4.1kg bottles.
Each case weighs 16.4kg.
- Innovative solid chemical technology
- High performance boiler water formulation developed for the treatment of condensate lines
- Based on a proprietary compound of morpholine, cyclohexylamine and DEHA amines
- Significant safety improvements
- Easy to handle, simple to dose
- Environmentally friendly
- Reduces carbon footprint
- Significant space savings
|Solubility in water:||Complete but dissolves slowly|
|pH (1% solution):||9.5+|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
The application feedrate for Accepta 6043 is dependent on both the amount of condensate and feed water alkalinity; and the levels of oxygen in the condensate.
Testing & Control
|Testing||In Condensate Return|
|pH||7.0 – 8.5|
|Iron||< 1 ppm|
Test kits suitable for monitoring and controlling the use of Accepta 6043 are available from Accepta.
Feed Accepta 6043 using an Accepta board system.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 6043 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 6043 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: