Accepta 2068 is a high performance, ammoniated citric acid based reverse osmosis treatment, scientifically formulated for the removal of iron deposits and calcium carbonate from reverse osmosis systems.
Accepta 2068 effectively removes both calcium carbonate and iron deposits and will aid the operation and performance of reverse osmosis systems.
- High performance ammoniated citric acid based treatment for reverse osmosis systems
- Effectively removes calcium carbonate and iron deposits
- Based on ammoniated citric acid
|Odour threshold:||Not relevant|
|pH:||3.5 - 4.0|
|Initial boiling point||~100°C|
*Full details of the product properties are available in the Accepta MSDS.
Application & Dosage Information
Typical dosing regime for Accepta 2068 is as follows. Make up a 4% solution of Accepta 2068 at 20oC - 30oC and circulate, then soak for 15 minutes each alternately for 2 hours.
Flush thoroughly then discard, after restarting discard the first 15 minutes of permeate.
Our technical consultants will advise on the ideal level of dosage and testing regime for your individual system
It is advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Contact Accepta technical support for additional technical advice.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2068 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: