Accepta 2066 is a high performance, general-purpose reverse osmosis (RO) membrane cleaner, scientifically formulated to support the cleaning of acid insoluble sulphates of calcium, barium and strontium, as well as calcium fluoride from reverse osmosis membranes.
Accepta 2066 is effective in removing iron oxides and hydroxides as well as calcium carbonate.
During normal operation, reverse osmosis and other membranes can become fouled, which greatly reduces the efficiency of the system. Deposits build up on the membrane until they cause a reduction in normalised permeate flow, increases in differential pressure and losses in salt rejection.
The effects of fouling can lead to poor water quality, loss in production, unscheduled downtime and premature membrane replacement.
A regular maintenance and cleaning programme can provide a significant return on investment by extending system run time, preventing membrane degradation, maintaining lower feed pressures and extending the membrane’s life.
- Suitable for use with polyamide thin film composite and cellulose acetate membranes
- Supports the removal of acid insoluble scale
- Liquid product for ease of application
- High level of active substance
- Broad spectrum of application
|Appearance:||Light yellow liquid|
|pH:||12 - 13|
|Solubility in water:||Miscible|
|Freezing point:||-13 °C|
|Boiling point:||107 °C|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 2066 should always be used as recommended by the membrane manufacturer with respect to pH, temperature, flow rate and differential pressure.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Contact Accepta technical support for additional technical advice.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2066 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: