Accepta 4340 is a high performance; cationic high molecular weight latex polyacrylate based flocculant with a 10% charge.
Accepta 4340 can be used in effluent treatment as a flocculant and also pulp and paper processes.
Accepta 4340 is designed to increase retention of fines, fillers, additives and improve drainage.
Accepta 4340 works over a wide pH range, has a low charge density and a very high molecular weight.
- High performance cationic high molecular weight latex polyacrylate
- Excellent when used as a flocculant for effluent treatment systems
- Ideal for use in pulp and paper processes
- Increases retention of fines, fillers and additives
- Improves drainage
- Effective over a wide pH range
|pH:||3 - 7 @ 5 g/1|
|Approx. bulk density:||1.04|
|Flash point:||Does not flash|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
As adequate inversion is required, please contact Accepta for the correct dosing procedure for Accepta 4340.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 4340 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: