Accepta 4222 is a high performance, very high molecular weight cationic polyacrylamide scientifically formulated for use in industrial and process wastewater treatment and effluent treatment applications.
Accepta 4222 is a very versatile dry polymer that is particularly useful for wastewater treatment applications including belt filter, centrifuge and screw press de-watering, water clarification, filtration, thickening or use in a Dissolved Air Flotation plant.
Accepta 4222 has a mole charge of 20%.
- High performance very high molecular weight cationic polyacrylamide
- Accepta 4222 being a granular powder is very economical to use
- Achieves high solids capture
- Improves throughput and cake solids
|Molecular weight:||Very high|
|pH:||2.5 - 4.5 @ 5 g/1|
|Melting point/range:||Not applicable|
|Flash point:||Not applicable|
|Autoignition temperature:||Not applicable|
|Approx. bulk density:||0.80|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Prepare a stock solution of Accepta 4222 of up to 0.5% concentration via an automated make down unit or as a batch.
Allow solution to age for 30 to 60 minutes for maximum effectiveness. Then use good quality make up water to give secondary dilution of at least 10:1 (clean water to stock solution). Then add as required.
AVOID the use of centrifugal pumps.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 4222 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: