Accepta 3540 is a high performance solvent based, self emulsifying quick break cleaner scientifically formulated for cleaning activities where heavy soiling is encountered.
A technically advanced formululation, Accepta 3540 rapidly demulsifies under static conditions after rinsing, in order to permit the acceptable discharge of waste water.
Accepta 3540 is a very versatile cleaning product and can be used in a wide range of applications where heavy soiling is encountered.
- High performance self emulsifying quick break cleaner
- Designed for heavy soiling
- Technically advanced formululation
- Rapidly demulsifies to permit discharge of waste water
|Flash point:||40 oC|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Apply Accepta 3540 by brush or spray directly onto soiled areas. Allow a contact time of about 5 minutes then rinse the emulsion off with hot or cold water at a typical pressure of 80 - 100psi.
Allow rinse water to dwell in oil/water separator for 30 minutes before discharge of the aqueous layer.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 3540 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 3540 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: