Accepta 2525 is a high performance sulphamic acid based descaler with indicator dye, scientifically formulated for the removal of calcium carbonate deposits from heat exchanger surfaces and process equipment.
Accepta 2525 is a technically advanced chemical treatment that is less corrosive than hydrochloric acid and is recommended for stainless steel.
Accepta 2525 has the added benefit of a Methyl orange indicator to show when the descaling solution has been neutralised.
- Highly effective acid descalant
- Removes calcium carbonate deposits
- Ideal treatment for heat exchange surfaces and process equipment
- Less corrosive than hydrochloric acid
- Recommended for stainless steel
- Contains visual indicator dye
|Solubility in water:||Completely miscible|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Typical dosage of Accepta 2525 is 5 - 10%.
For fast cleaning or heavily scaled equipment dose at 10% (1Kg per 10 Lt).
For lighter duty applications dose at 5% (0.5Kg in 10 Lt).
Use warm water to dissolve the product.
Acid solutions should be neutralised before discharge to drain.
A fresh solution of the product will be red/orange in colour. When the products is spent the colour will be yellow.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 2525 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2525 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: