Accepta 2341 is a high performance; non-toxic drinking water treatment scientifically formulated to control red water, corrosion and scale formation in hot and cold water distribution systems.
Accepta 2341 is a non-toxic treatment chemical accepted by Water Authorities in the United Kingdom for the threshold treatment of potable drinking water supplies.
When Accepta 2341 is used at comparatively low concentrations it will control red water, metallic corrosion and scale formation in hot and cold water distribution systems.
- High performance, non-toxic drinking water treatment.
- Accepted by UK Water Authorities for the threshold treatment of potable water
- Controls red water, metallic corrosion and scale formation in hot and cold water systems
- Effective at comparatively low concentrations
|Freezing temp:||0 oC|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 2341 should be dosed continuously into the system at the rate of 1 5-25ml/m3.
This is most readily facilitated using a water meter controlled metering pump.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 2341 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2341 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: