English Arabic Chinese (Simplified) French German Greek Italian Polish Portuguese Russian Spanish
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +44 (0) 161 877 2334

Biodegradation of Fats, Oil & Grease (FOG) in Sewer Lines & Municipal Sewage Treatment Plants

Biodegradation of Fats, Oil & Grease (FOG) in Sewer Lines & Municipal Sewage Treatment Plants

Accepta 7112 is a high performance, very concentrated powdered biological formulation containing a synergistic blend of selectively adapted bacteria, surfactant, and enzymes scientifically formulated for the treatment and biodegradation of fats, oil and grease (FOG) in sewer lines and municipal sewage treatment plants.

Accepta 7112 is recommended for a wide variety of municipal sewage treatment applications involving problematic accumulations of fats, oils and grease (FOG).

Accepta 7112 is specifically formulated to:

  • Degrade long chain fatty acids that are known to be persistent and cause 80% of deposits
  • Associate with the hydrophobic phase
  • Grow at low pH
  • Degrade odour causing short- chain volatile fatty acids

biodegredation-oil-grease-7112

Areas of Application

Accepta 7112 is routinely used by plant operators in lift stations, degreasers, primary clarifiers and aeration basins.

When introduced into the system, Accepta 7112 dissolves rapidly and releases its highly active biological materials which will emulsify, liquefy and digest oil and grease.

Product Benefits

  • High performance concentrated formulation, containing adapted bacteria, surfactant and enzymes
  • Excellent for the biodegradation of fats, oil and grease (FOG) in sewer lines and municipal sewage treatment plants
  • Reduces line and pump station maintenance costs
  • Liquefies and degrades fats, oil and grease that upset degreaser
  • Enhances the oxygen transfer in the aeration basin
  • Enhances organic removal efficiency
  • Lowers effluent BOD and COD
  • Reduces foaming over the aeration basin surface
  • Eliminates foul odours due to grease deposits

Product Properties

Contains vegetative and spore forming bacterial strains capable of utilising aerobic,
facultative and fermentative metabolic pathways.
Rapid germination and outgrowth of spores
Bacteria can colonize a wide variety of surfaces to produce long-lasting effects
Bacterial count: 5 x 109 cfu / g
Appearance: Brown powder in water-soluble sachet
Odour: Yeast-like
Moisture content: 15 %
Density: 0.50 -0.61 g/cm3

*Full details of the product properties are available in the Safety Data Sheet. See below.

Application & Dosage Information

Accepta 7112 can be added directly to any of the following systems, depending on the locations affected by grease problems:

  • Lift Station
  • Degreaser
  • Primary Clarifier
  • Aeration Basin

Accepta 7112 is added, without preliminary preparation, to the sewage.

The standard dosage rate is 4 sachets per week. However, up to six weeks of elevated doses may be required to implement the new active biomass.

These doses are related to the daily flow rate in m3 /day (see the table below).

Flow (m3/day) Seeding (wks 1 & 2) Maintenance (wks 3 - 6) Regular maintenance
< 100 8 Sachets / week 4 Sachets / week 4 Sachets/week
100 - 200 16 6
200 - 500 32 8

For higher flow rates, the use of 1kg bag is recommended.

It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.

Contact Accepta technical support for additional advice.

Safety, Storage & Handling

For full details concerning safety precautions, storage and handling procedures for Accepta 7112 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link:

Safety Data for Accepta 7112

World Class Expertise

Accepta work with industry worldwide delivering practical, cost effective solutions to resolve complex problems. If you require technical assistance, or information about our water treatment chemicals and other speciality products, please contact our dedicated technical support team on:

+44 (0) 845 519 89 90 or complete our Technical Support form.

Expert Training

Develop your skills with our internationally recognised water and wastewater treatment training courses. Delivered by world leading industry experts and designed for engineers, facilities managers and environmental professionals... water treatment training.

Keep upto date with our extensive library of good practice guides, latest research, regulatory updates, news and more... knowledge base.

Custom Chemical Manufacturing

Accepta offer custom chemical manufacturing, specialist toll blending and white label production services for our own water treatment chemicals and client specific formulations to UK and international customers.

To discover how you could benefit from our environmentally sensitive, quality driven chemical manufacturing capabilities please call us on +44 (0) 161 877 2334 or contact us.

International Distributor Opportunities

Accepta's innovative, quality driven customer focused business model creates exciting global supply chain and distributor opportunities for established and ambitious businesses currently active within the water treatment, wastewater treatment and environmental services sectors around the world.

If you are interested in becoming an exclusive international distributor of Accepta water treatment technologies please click here to learn more.

bsi-ukas-14001-2004bsi-ukas-9001-2008british-association-for-chemical-specialitiesinvestors-in-people-iip  greater-manchester-chamber-of-commerce-member