Accepta 2613 is a high performance all-organic scale and corrosion inhibitor for the treatment and protection of open recirculating cooling water systems operating under high stress conditions.
Accepta 2613 is scientifically formulated using a blend of very effective corrosion and scale inhibitors designed for use in high stress open recirculating cooling water systems.
- High performance all-organic cooling water treatment
- Ideal for open recirculating cooling water systems
- Excellent for systems operating under high stress conditions
- Convenient liquid product
|Specific Gravity:||1.05 - 1.10|
|Freezing Point:||0°C (32°F)|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
The target dosage range for Accepta 2613 is 3 - 5 ppm as PO4-3 in the recirculating cooling water.
Accepta 2613 should be fed neat or as part of an appropriate mix to the cooling water system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Accepta 2613 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Phosphonate Drop test - Thorium Nitrate titration
- Phosphonate UV photolysis + colour disc
Material of Compatibility
Safety, Storage & Handling
Accepta 2613 is an alkaline solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2613 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: