Accepta 2611 is a high performance all organic cooling water corrosion and scale inhibitor available in a concentrated liquid form.
Accepta 2611 is scientifically formulated using an all-organic blend of corrosion and scale inhibitors designed for the treatment and protection of high stress open re-circulating cooling systems.
- High performance cooling water scale and corrosion inhibitor
- Cost effective concentrated blend
- Formulated using all-organic blend of corrosion and scale inhibitors
- Ideal for high stress open re-circulating cooling systems
- Convenient liquid product
|Colour:||Clear dark amber|
|Specific Gravity:||1.10 – 1.20|
|Freezing Point:||-4°C (25°F)|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
The target dosage range for Accepta 2611 is 3 – 5 ppm as PO4 -3 in the re-circulating cooling water.
Accepta 2611 should be fed neat or as part of an appropriate mix to the cooling water system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Accepta 2611 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Phosphonate Drop test - Thorium Nitrate titration
- Phosphonate UV photolysis + colour disc
Material of Compatibility
Safety, Storage & Handling
Accepta 2611 is an alkaline solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2611 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: