Accepta 2876 is a high performance zinc phosphonate based cooling water scale and corrosion inhibitor scientifically formulated for the treatment and protection of open re-circulating water systems operating under corrosive water conditions.
Developed as a multi-functional blend of scale and corrosion inhibitors, Accepta 2876 is designed for systems operating under corrosive water conditions, low to medium hardness and/or alkalinity.
Accepta 2876 is proven to provide protection over a wide range of operating parameters and is applicable for 50 - 800 calcium and 100 - 350 M-alkalinity.
- High performance zinc phosphonate scale and corrosion inhibitor
- Suitable for open re-circulating water systems
- Ideal for corrosive water conditions (low to medium hardness and/or alkalinity)
- Excellent multi-funtional
- Proven protection over range of operational parameters
|Density:||1.03 - 1.05 kg/m3|
|pH:||0.5 - 2.0|
|Freezing point:||< 0 oC|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
The typical dosage for Accepta 2876 is 135 ppm.
The dosage is dependent on the alkalinity, calcium hardness, pH and temperature of the re-circulating water.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 2876 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2876 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: