Accepta 2825 is a high performance silicate based cooling water scale and corrosion inhibitor scientifically formulated to treat and protect cooling water systems under low to medium water hardness conditions.
Its formulation comprises a synergistic blend of corrosion and deposit control agents, and it is based on polymeric silicate and acrylic polymers.
Accepta 2825 inhibits both ferrous and non-ferrous metal corrosion and also exhibits excellent deposit control.
Accepta 2825 is best used in low to medium hardness waters.
- High performance silicate scale and corrosion inhibitor
- Non-polluting formulation, containing no heavy metals or nitrites
- Passivates active corrosion cells
- No additional pH control of the system is required
- Gradually removes existing corrosion debris
|Colour:||Hazy brown coloured|
|Boiling point:||100 oC|
|pH (concentrate):||11.0 - 12.50|
|Density (kg/m3):||1.2 - 1.25|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 2825 is typically dosed at 60-100ppm (45-80 ml per cubic metre divided by CF).
Accepta 2825 may be fed into the system using normal dosage equipment or directly from the drum.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 2825 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2825 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: