Accepta 0030 is a new and highly advanced water treatment scale and corrosion inhibitor formulated using both anodic and cathodic site passifiers. Accepta 0030 is scientifically formulated to protect systems containing ferrous metals, copper, copper alloys, zinc and aluminium.
Accepta 0030 will control both ferrous and non-ferrous metal corrosion at elevated temperatures and under a variety of water conditions and flow velocities.
Accepta 0030 provides protection to systems containing ferrous metals, copper, copper alloys, zinc and aluminium by utilising a blend of powerful inhibitors operating at a neutral pH.
- Highly advanced scale and corrosion inhibitor formulated with both anodic and cathodic site passifiers.
- Provides effective protection to all system metals including zinc, aluminium and copper alloys.
- Maximises boiler efficiency by reducing scale formation in the boiler heat exchanger.
- Contains no metallic elements.
- Does not contain phosphate.
- Simple field test.
|Colour:||Colourless to pale yellow|
|Flash point °C:||> 100|
|Relative density:||~1.04 g/ml|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 0030 is dosed at a rate of 1% of the system volume.
For best results it is advised that untreated or dirty systems are chemically cleaned and flushed before treatment.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
A simple test kit is available to monitor, control and maintain correct levels of Accepta 0030 in the system water.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 0030 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: