Accepta 2620 is a high performance cooling water corrosion inhibitor developed for the treatment and protection of closed loops.
Accepta 2620 is scientifically formulated from a blend of inorganic and organic corrosion inhibitors for use in closed loop systems.
Accepta 2620 is designed for use in low/medium pressure hot water systems, and in particular those containing aluminium.
- High performance corrosion inhibitor for closed loop systems
- Ideal for high low/medium pressure hot water systems
- Ideal for systems containing aluminium
- Convenient liquid product
|Colour:||Clear, light brown|
|pH:||8.0 - 8.6|
|Specific Gravity:||1.10 - 1.20|
|Freezing Point:||10°C (14°F)|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Target dosage range for Accepta 2620 is 165 - 220ppm as Mo in the closed loop water.
Accepta 2620 should be fed neat using a chemical metering pump or via a bypass pot feeder to a system location where it can be uniformly mixed and thoroughly distributed.
Appropriate use of Accepta 2620 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Molybdate Checkit kit (comparator)
- Molybdate Colour Disc
Material of Compatibility
|PVC :||Not recommended|
Safety, Storage & Handling
Accepta 2620 is a mildly alkaline solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2620 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: