Accepta 2504 is a high performance sludge conditioner scientifically formulated for the treatment of boiler feed water systems.
Accepta 2504 is used to condition and disperse any residual hardness from within the boiler water.
Accepta 2504 is based on a sulphonated polymer and also contains 20% sodium hexametaphosphate.
Accepta 2504 is most effective in the presence of caustic alkalinity.
Accepta 2504 causes hardness cations to form a fine non-adherent sludge which is removed with the boiler blowdown.
- High performance sludge conditioner
- Helps maintain heat transfer efficiency
- Compatible with most boiler water treatments
|Appearance:||Pale straw liquid|
|Composition:||An aqueous solution of sulphonated polymers
and sodium polyphosphate
|pH:||4.5 - 6.0|
|Specific gravity (@ 20 oC):||1.183|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Dose Accepta 2504 to give phosphate reserves in the boiler that comply with B.S. 2486 : 1997.
Dose Accepta 2504 in proportion to feedwater flow. The dosage rate will depend on the degree of potential fouling (ie level of residual hardness).
Dose Accepta 2504 into the feedtank or feed line via a positive displacement pump.
Testing & Control
Filter sample. Test for phosphate using high range (0 - 100 ppm phosphate) comparator method from Accepta.
Filter sample. Test for phosphate using high range (0 - 100 ppm phosphate) comparator method.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2504 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: