Accepta 2605 is a high performance, all-in-one boiler water treatment based on organic tannin with built in alkalinity booster.
Accepta 2605 is an excellent corrosion and scale inhibitor scientifically formulated using hydrolysable tannin as an oxygen scavenger plus built in alkalinity booster.
Accepta 2605 is designed for the treatment of small boilers.
- High performance all-in-one water treatment formulation for small boilers.
- Based on hydrolysable tannin.
- Includes built in alkalinity booster.
- Offers excellent corrosion and scale inhibitor performance.
- Excellent system protection.
- Ideal for small boilers.
|Specific Gravity:||1.05 - 1.10|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Target dosage range for Accepta 2605 is 30 - 60 ppm as PO43- in the boiler water.
Accepta 2605 should be fed neat or as part of an appropriate mix to the boiler feedwater system where it can be uniformly mixed and thoroughly distributed using a chemical metering pump.
Appropriate use of Accepta 2605 following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For additional assistance please contact Accepta.
- Phosphate Checkit kit k (comparator)
- Phosphate Colour disc / Total PO4
Material of Compatibility
Safety, Storage & Handling
Accepta 2605 is an alkaline solution. Avoid contact with skin, eyes or clothing. If skin comes into contact with product, wash with water. If eyes are affected, flush with water for at least 15 minutes and get medical attention.
For full details concerning safety precautions, storage and handling procedures for Accepta 2605 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: