Accepta 2820 is a high performance, scientifically formulated blend of neutralising amines designed to give maximum corrosion protection for condensate systems.
The distribution ratios of the amines in Accepta 2820 is such that protection is given no matter if the condensate system is long or short.
Accepta 2820 also contains an amine which absorbs more carbon dioxide weight for weight than any other neutralising amine.
- Balanced distribution ratio - short and long run protection.
- Higher boiling point - lower deaerator losses.
- Improved safety - lower toxicity, also contains amines with higher flash points.
- Cost effective - neutralises more CO2.
|Appearance:||Clear pale liquid|
|pH:||12 - 13|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
The rate of dosage of Accepta 2820 is dependent upon the amount of carbon dioxide in the steam.
Accepta 2820 should be diluted as instructed with clean water and dosed continuously.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2820 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: