Accepta 2526 is a high performance non-oxidising biocide based on bronopol scientifically formulated for use in a range of industrial and process water treatment applications.
Accepta 2526 is a highly effective low foaming, broad spectrum disinfectant and biocide that is effective against Legionella bacteria and other unwanted organisms.
Accepta 2526 can also be used as a secondary biocide in systems being treated with halogen.
Accepta 2526 is supported through the Biocide Products Directive.
- High performance non-oxidising biocide
- Ideal for a range of industrial and process water treatment applications
- broad spectrum of activity
- Effective against Legionella bacteria
- Low foaming
- Can be used as a secondary biocide in systems being treated with halogen
|Composition:||Sodium hydroxide, phosphonates, polymers and azole|
|Specific gravity:||1.112 (@ 20oC)|
|pH:||10 - 14|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Dose Accepta 2526 to give 200 ppm (200 g per 1000 lt).
Accepta 2526 can be dosed by hand or through automatic dosing equipment.
Alternate the use of a biocide with a second product to prevent the development of resistant bacteria strains.
Accepta 2526 is compatible with most cooling water treatment products. But do NOT mix neat products.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 2526 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2526 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: