Accepta 2514 is a high performance broad spectrum disinfectant and biocide developed for use in industrial water treatment applications. Accepta 2514 is based on quaternary ammonium chloride (QAC).
Accepta 2514 is effective against Legionella bacteria and is ideal for use in heavily soiled systems. It also offers excellent surfactant properties and acts as a combined biodispersant and biocide.
This product can be used as a secondary biocide in systems being treated with halogen.
Accepta 2514 is supported under the Biocidal Products Directive (BPD).
- High performance broad spectrum disinfectant and biocide.
- Effective against Legionella bacteria.
- Ideal for use in heavily soiled systems.
- Acts as a combined biodispersant and biocide.
- Excellent surfactant properties.
- Can be used as a secondary biocide in systems being treated with halogen.
|Composition:||Aqueous solution of quaternary ammonium chloride|
|Gravity @ 20°C:||0.99|
|pH:||6 - 8|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Dose Accepta 2514 to achieve 200 ppm (200 g per 1000 L). This product can be dosed by hand or through automatic dosing equipment. Note, overdosing may result in a stable foam.
It is recommended that users alternate the use of suitable biocides to prevent the development of resistant bacterial strains.
Note - Accepta 2514 contains a cationic material, do not over dose in the presence of anionic dispersants.
Do not mix Accepta 2514 with other chemicals.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Measure the QAC level using an Accepta drop test method.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2514 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: