Accepta 2327 is a high performance broad spectrum, non-foaming, readily biodegradable micro-biocide scientifically formulated for the treatment of industrial cooling water systems.
NOTE: This product is no longer available and has been replaced by the following alternatives:
If you require product selection assistance or technical advice please contact us.
Accepta 2327 is based on a formulation of Isothiazolin derivatives (1.5%) and is completely soluble in water.
At relatively low concentrations Accepta 2327 is effective against a range of micro-organisms including many gram positive and gram negative bacteria, fungi and algae.
- Broad spectrum micro-biocide effective at lower concentrations.
- Effective over a wide range of pH.
|Appearance:||Pale green coloured liquid|
|pH:||3.5 - 4.5|
*Full details of the product properties are available in the Safety Data Sheet. See below.
Application & Dosage Information
Accepta 2327 should be dosed periodically at a rate of 100 - 200ppm of the total system volume.
In a badly fouled system an initial shock dose of up to 500ppm may be required. This product is effective over a wide range of pH and can be used in isolation or alternately with other non-oxidising or oxidising biocides.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2327 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: