Accepta 2856 is a superior quality precursor used for the generation of chlorine dioxide. This product is based on 8% sodium chlorite in an aqueous solution.
Chlorine dioxide is made by reacting sodium chlorite and an acid in a controlled manner.
Chlorine dioxide is a highly effective super sanitising chemical agent that is highly recommended for use where the control of microbiological activity is essential, if not critical. Because of its biocidal characteristics, chlorine dioxide is ideal for the control of surface and waterborne pathogens; and the control and removal of stubborn biofilm. In fact, it has consistently been shown to be the best molecule for eradicating the causative organism of Legionnaires' disease.
In the UK, the Building Services Research and Information Association has recommended chlorine dioxide as the best available technology for control of Legionella in hot and cold water systems.
- High quality precursor for the generation of chlorine dioxide
|Appearance:||Clear pale yellow liquid|
|Boiling point:||100 oC|
|Density (kg/m3):||1.040 - 1.080|
|pH (concentrate):||10.0 - 13.0|
*Full details of the product properties are available on the MSDS
Application & Dosage Information
Dose Accepta 2856 as required. There acid selected should match the strength of the chlorite product where possible.
It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use.
For further technical assistance concerning Accepta 2856 please contact Accepta.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for Accepta 2856 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link: