Accepta's high performance, multi-use engineering test kit (with additional titration syringe) has been specially developed for engineers, water treatment professionals; and building services and facilities management specialists involved in the maintenance and management of boilers, cooling and closed water systems.
Accepta's professional multi-parameter water quality analysis testing kit will allow engineers to perform quick and accurate in-field testing and analysis procedures for an extensive range of important system parameters including conductivity, TDS, pH, alkalinity, bromine, chlorine, hardness, iron, molybdate and more.
Water systems require careful test monitoring to ensure the correct risk management regimes and water treatment programmes are maintained at all times.
Failure to maintain the correct water system conditions can lead to serious problems, including reduced system efficiency, the build-up of scale, potentially damaging corrosive water conditions, and increased microbiological activity, which may result in the proliferation of Legionella bacteria and the increased risks associated with Legionnaires’ disease.
Accepta's comprehensive “multi-use” test kit has been developed as a complete kit, specifically for engineers and water treatment professionals involved with the maintenance and management of boiler systems, cooling water and closed systems.
Accepta's comprehensive combined test kit is presented in its own robust Aluminium carry-case and includes all the equipment and reagents necessary to perform between 100 and 200 tests required to effectively test and monitor boiler, cooling and closed system waters to ensure optimum operating conditions are achieved and maintained.
Now also includes white testing platform for easy analysis.
Multi-Use Test Kit Contents
|Aluminium case foam filled with white testing board|
|1 x 20ml Luer Lock Syringe|
|1 x 10ml Luer Lock Syringe|
|1 x 5ml Standard Syringe|
|1 x 1ml Standard Syringe|
|1 x Filter Holder 25mm|
|1 x Filter Paper GF/C (50)|
|1 x 125ml Test Bottle|
|4 x 65ml Test Bottles|
|1 x Comparator|
|4 x 10ml Plastic Comparator Cells|
|1 x Tablet Crusher|
|1 x 10ml Testing Tube|
|1 x 250ml Washer Bottle|
|Combined pH/Cond’y/TDS/Temperature Jenway 430 Meter:
Range : pH: 0 to 14 / Cond’y: 0 to 199.9mS / TDS: 0 to 199.9g/l / Temp: -9.9 to +99.9°C
|Alkalinity p (Titration):
Alkalinity Cartridge (2 x 20ml for all Alkalinities)
|Alkalinity M (Titration):
|Alkalinity OH (Titration):
Chloride Cartridge (2 x 20ml)
DPD No1 Tablets (50)
DPD Nitrite Powder (20gm)
DPD No1 Tablets (50) (Already in other test)
DPD No3 Tablets (50)
|Iron LR (Comparator):
|Iron HR (Comparator):
|Molybdate HR+ (Comparator):
Molybdate HR (65ml)
|Hardness Total (Titration):
Hardness Cartridge HR (2 x 20ml for all Hardness)
|Hardness Calcium (Titration):
|Hardness Stop/Go (Drop Test):
Stop/Go Reagent (65ml)
Sulphite Cartridge (2 x 20ml)
Phosphonate Cartridge (2 x 20ml)
50% Sulphuric Acid (65ml)
Nitrite Cartridge (2 x 20ml)
|Tannin (Drop test):
|Calibration Solutions for Jenway 430 Meter:
Standard Conductivity 12.88mS (65ml)
pH 4 (65ml)
pH 7 (65ml)
pH 10 (65ml)
|20% Acetic Acid (65ml)|
|Refractometer (PEG & MEG)|
|6 x Titration Syringe Assemblies (1ml Syringe)|
If you require additional information or specialist technical support concerning our professional multi-parameter engineers test kits please contact Accepta's technical support team.