Accepta's high performance cooling water test kit for open and closed water systems has been specially developed for engineers, water treatment professionals; and building services and facilities management specialists involved in the maintenance and management of open and closed cooling water systems.
Accepta's professional water analysis testing kit will allow engineers and water treatment professionals to perform quick and accurate in-field testing and analysis procedures for a range of important cooling water system parameters including conductivity, TDS, pH, bromine, chlorine, iron and more.
Cooling water systems require careful test monitoring to ensure the correct water conditions are maintained at all times. Failure to maintain correct treatment programs can lead to serious problems including reduced efficiency, the build-up of scale, potentially damaging corrosive water conditions and increased microbiological activity, which may include the growth of Legionella bacteria.
Accepta's comprehensive cooling water test kit has been developed specifically for engineers and water treatment professionals involved with the maintenance and management of both open and closed cooling systems to ensure optimum operating conditions.
- Comprehensive cooling water monitoring tools
- Compact and portable design
- Ideal for water treatment engineers
Key Parameters Included
This cooling water kit will test for the following parameters:
|pH||0 - 14|
|Alkalinity M||0 - 2400ppm|
|Bromine||0 - 5ppm|
|Chloride||0 - 3000ppm|
|Hardness Calcium & Total||0 - 1200ppm|
|Iron LR||0 - 1ppm|
|Iron HR||0 - 10ppm|
|Phosphonate||0 - 20ppm|
Note: Range is dependent on measuring instrument used.
Industrial water Treatment
Cooling water systems and closed water systems require careful monitoring to ensure that the correct water conditions are maintained within an approved treatment programme.
Our comprehensive cooling and closed system test kit has been designed specifically for water treatment professionals involved in the maintenance and management of cooling and closed systems to ensure optimum operating conditions are maintained.
Any failure to maintain the correct levels and dosing of the chemical treatments can lead to:
- Corrosion of the system (leaks)
- Formation of scale (blocked pipes)
- Increased biological activity
These can lead to unstable water conditions with potential negative consequences to the life of the plant and operating costs.
Accepta's cooling water test kit is presented in its own robust carry-case and includes all the equipment and reagents necessary to perform between 100 and 200 tests required to effectively test and monitor system waters.
Replacement reagents and other components are available.
Cooling Water Test Kit Contents
|Plastic robust case with foam inserts|
|1 x 20ml Luer Lock Syringe|
|1 x 10ml Luer Lock Syringe|
|1 x Filter Holder 25mm|
|1 x Filter Papers GF/C (50)|
|2 x 65ml Test Bottles|
|1 x Comparator|
|2 x 10ml Comparator Cells|
|1 x Tablet crusher|
|1 x 10ml Testing Tube|
|Pocket pH1 Meter|
|Pocket Conductivity/TDS/Temp/Salinity Meter|
|Alkalinity M (Drop Test):
|Hardness Total (Drop Test):
|Hardness Calcium (Drop Test):
H/TH4/CH3 (65ml) (Already in other test)
TH3 (65ml) (Already in other test)
|Hardness Stop/Go (Drop Test):
Stop/Go Reagent (65ml)
|Chloride (Drop Test):
|Iron LR (Comparator):
|Iron HR (Comparator):
DPD No1 Tablets (50)
DPD Nitrite Powder (20g)
|Molybdate HR+ (Comparator):
Molybdate HR (65ml)
|Nitrite HR (Drop Test):
|Phosphonate (Drop Test):
P1/4 Tablets (50)
|Calibration Solutions for Pocket Meters:
Standard Conductivity 1413mS (65ml)
pH 4 (65ml)
pH 7 (65ml)
pH 10 (65ml)
If you require additional information or specialist technical support concerning ourcooling water test kits please contact Accepta's technical support team.