Accepta 2080: Low nitrite / molybdate for closed circuits: Low nitrite / molybdate for closed circuit systems.

Accepta 2081: High molecular weight liquid cationic polymer: Accepta 2081 is a high molecular weight liquid cationic polymer, which does not contain any oil or surfactants. Is effective over a broad pH range and at low temperatures.The product is designed to flocculate suspended solids, and is recommended for the following applications non-potable raw water clarification, primary and secondary effluent clarification, oil wastewater clarification, enhanced organics removal, and filtration.

Accepta 2083: Multifunctional nitrite based corrosion inhibitor: Accepta 2083 is a multifunctional, nitrite-based chemical treatments used for the control of corrosion in closed cooling systems, chiller water systems and hot water heating systems. They are liquid products containing a combination of corrosion inhibitors, a buffer and a treatment indicator dye.

Accepta 2085: High molecular weight liquid cationic polymer: High molecular weight liquid cationic polymer that does not contain oil or surfactants. Designed to flocculate suspended solids and is especially recommended for use in non potable raw water clarification, primary and secondary effluent clarification, oil waste water clarification. Based on polyacrylamide.

Accepta 2088: Multifunctional treatment for closed circuit heating tannin / OH / carbonate: Accepta 2088 is a tannin based multifunctional for boilers and closed circuits. Contains Casutic and carbonate as pH correction and hardness control.

Accepta 2089: Multifunctional treatment for closed circuit heating tannin / carbonate: Accepta 2089 is a tannin and carbontae based multifunctional treatment for closed circuits and boilers.

Accepta 2092: Molybdate based cooling water treatment : a molybdate / phosphonate blend of scale and corrosion inhibitors and dispersants. It is designed for use in recirculating cooling water systems where the water is corrosive (low hardness and/or low alkalinity).

Accepta 2094: Polyphosphate scale & corrosion inhibitor for once through systems: Accepta 2094 is a special blend of polyphosphates in liquid form for use as a corrosion inhibitor, scale prevention, iron and manganese stabiliser in industrial once-through cooling water systems and reverse osmosis systems. It is also used in thermal treatment applica-tions like pasteuriser and steriliser systems in the cooling section. It is applicable in domestic and potable water systems up to 75°C to effectively prevent scaling and corrosion.

Accepta 2095: Polymer based RO scale inhibitor: Accepta 2095 is a phosphonate based scale inhibitor. When dosed in the feed water, it is capable of inhibiting scale in high brine LSI conditions (up to +2.5) and protects the system against other fouling species.