Accepta 3538 - Quick break emulsifying bilge cleaner & degreaser - used as an emulsifying cleaner and degreaser with a quick break action. This means that the oils and greases are emulsified for rinsing but the resulting emulsion is unstable and breaks back to form an easily disposable supernatant waste. This product will enable you to meet the international maritime discharge criteria of 15ppm limit on hydrocarbons and oils for discharge.

Accepta 3539 - Heavy duty liquid degreaser - a very powerful liquid degreaser, formulated from special solvents, emulsifiers and wetting agents. The product combines maximum effectiveness with minimum hazard. Will safely remove heavy fuel oils and diesel, carbon stains, preservative coatings, packing grease, asphalt, tar, resins, printers ink etc. It is ideal for removing oil spills of floors and engine room equipment on board ships.

Accepta 3540 - Quick break, self emulsifying cleaner - Solvent based, self emulsifying cleaner designed for heavy soiling. Rapidly demulsifies under static conditions after rinsing in order to permit the acceptable discharge of waste water.

Accepta 3541 - General purpose heavy duty detergent (concentrate) - specially formulated, fast acting, heavy duty maintenance cleaner which does not need rinsing with water. A single wipe with the prepared solution will leave a bright surface free from streaks and suds. Particularly effective against oil and grease bound dirt.

Accepta 3542 - Rig wash, general purpose detergent with oil dispersant (concentrate) - highly concentrated general purpose detergent with special oil dispersant and grease killing compounds. Being miscible with fresh or sea water in all proportions it is particularly useful for the shipping industry.

Accepta 3543 - Heavy duty alkaline detergent (concentrate) - an aqueous blend of soaps, synthetic detergent, solvents and inorganic alkaline builders. It is an extremely versatile heavy duty cleaner suitable for use in soak tanks, high pressure washers, automated scrubbing machines and for manual use.

Accepta 3544 - Diesel engine air cooler/scavenge trunk cleaner - liquid containing chlorinated solvents, petroleum solvents and surface active agents. It can be used for continuous "in-line" cleaning, during sea voyages, of diesel engine air coolers and scavenge trunk systems.

Accepta 3546 - Concrete cleaner (rapid action) - specially formulated for the rapid cleaning of all concrete surfaces that have become rust stained or ingrained with grime, can also be used to remove rust from plant and equipment.

Accepta 3547 - Water stain and scale remover - contains powerful wetting agents and solvents to leach dirt from surfaces that have been penetrated. Excellent for use on stainless steel, wood, glazed surfaces, toilets, baths, basins, concrete and terrazzo. This product is not a degreaser therefore oil and grease should be removed first, using Accepta 3539 for example.

Accepta 3548 - Odorless solvent cleaner (1,1,1 trichlorethane replacement) - replacement for 1,1,1 trichlorethane and other chlorinated and fluoro-chlorinated solvents. It is totally odour free so can be used in food and beverage plants, textiles, plastics, and electronics, and engineering industries. It is ideal for manual degreasing, spot cleaning and bench cleaning process involving spraying and wiping techniques.

Accepta 3549 - Type 2/3 oil spill dispersant - used for the rapid and effective dispersal of oil spills at sea, on sand or pebble beaches. Designed for undiluted spraying from aircraft and for ten-fold sea water dilution prior to spraying from sea going vessels. Conforms to UK specification LR 448.

Accepta 3550 - Type 2 oil spill dispersant (concentrate) - sophisticated system for the rapid and effective dispersal of oil spills at sea, on sand or pebble beaches, the product is highly concentrated. Designed only for ten-fold dilution and spraying from ships. Once applied the oil particles are then divided and separated forming a readily degradable microscopic emulsion. Conforms to UK specification LR 448.

Accepta 3522 - Diesel fuel oil conditioner and stabiliser - blend of biocides, dispersants and anti-oxidants to act as a complete fuel oil conditioner and stabiliser. Accepta 3522 will maintain diesel colour stability, control bacteria, help to prevent organic sludge formation, limit corrosion in bunkers, tanks and lines, prevent filter blockage and discourage injector sticking.

Accepta 3553 - Anti bacteria foulant for cooling water systems where direct sea water is employed - concentrated product containing an organic amine carried in a sea water dispersible solvent. It effectively controls fungi, algae, bacteria and crustaceal fouling in sea water. It therefore can be used in all ships cooling systems where direct sea water is employed.

Boiler water treatment - an extensive range of superior quality boiler water treatment products is available.

Cooling water treatment - an extensive range of superior quality cooling water treatment products is available.

Biocides - an extensive range of highly effective biocides is available.

Water test kits - an extensive range of water testing, analysis equipment and replacement reagents is available.

Wipes - an extensive range of wipe products is available, including specialist cleaners, paint removers, general hand wipes, antibacterial and sterile wipes etc.