Accepta offer a range of reliable, high performance brass bodied water meters suitable for a wide range of metering applications.
The Accepta CT series of contacting head water meters and are manufactured from high quality brass. They have been developed for the measurement of clean water such as towns supply water flowing into a water softener, evaporative cooling towers or any other element of process plant equipment requiring water volumes to be accurately measured.
The method of measurement used in the Accepta CT range is a high sensitivity turbine impulse sender which drives a large accurate gear train to provide both a consumption total and digital output.
The total volume readings are displayed on a mechanical non-reset counter, whilst the digital output is delivered by volt-free contacts proportional to the flow rate.
An integral reed switch provides an impulse rate factory selectable from 1 impulses per litre (K = 1), to 1 impulse per 100 litres (K = 100) depending on the size selected.
Cold Water Meters
For use up to 30 oC and pressures up to 10 bar. K = 1.0 or 10
|Accepta CT-FI 15||0.5"||up to 1.5 m3/hr||K = 1.0|
|Accepta CT-FI 20||0.75''||up to 2.5 m3/hr||K = 1.0|
|Accepta CT-FI 25||1''||up to 3.5 m3/hr||K = 1.0|
|Accepta CT-FI 30||1.25''||up to 5.0 m3/hr||K = 1.0|
|Accepta CT-FI 40||1.5''||up to 10 m3/hr||K = 10.0|
|Accepta CT-FI 50||2"||up to 15 m3/hr||K = 10.0|
Hot Water Meters
Hot water meters for use up to 90 oC and 10 bar K = 1.0 or 10
|Accepta CT-CI 15||0.5"||up to 1.5 m3/hr||K = 1.0|
|Accepta CT-CI 20||0.75''||up to 2.5 m3/hr||K = 1.0|
|Accepta CT-CI 25||1''||up to 3.5 m3/hr||K = 1.0|
|Accepta CT-CI 30||1.25''||up to 5.0 m3/hr||K = 1.0|
|Accepta CT-CI 40||1.5''||up to 10.0 m3/hr||K = 10.0|
|Accepta CT-CI 50||2"||up to 15.0 m3/hr||K = 10.0|
If you require additional information or specialist technical support concerning our water meters please contact Accepta's technical support team.