English Arabic Chinese (Simplified) French German Greek Italian Polish Portuguese Russian Spanish
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +44 (0) 161 877 2334

pH / Redox Panel Mounted Controllers

pH / Redox Panel Mounted Controllers

Accepta's range of high performance pH and Redox controllers (panel mounted) have been designed to accurately monitor pH and Redox levels. They are used in conjunction with our range of pH and Redox instruments and are suitable for use in a wide range of commercial, municipal and industrial process applications.

Accepta offer a full range of high performance pH and Redox meters, controllers and transmitters that have been designed to work with our range of pH and Redox electrodes.

Accepta's precision instruments are suitable for use in a wide range of commercial, industrial and process applications.

pH Measurement

pH is the measurement of hydrogen ion concentration in an aqueous liquid. It is this measurement that determines whether a liquid is neutral, acid or alkali (base).

pH is usually measured with a glass or Antimony combination electrode which produces a millivolt potential proportional to the pH of the liquid.

Redox (ORP) Measurement

Oxygen reduction potential is a measurement of oxidation or reduction of a solution, measured with a similar electrode to pH but with a platinum or gold sensor.

panel-mounted-controller-3

Accepta P76-85 - pH/mv Controller

The Accepta P76-85 is a high performance panel mounted controller ideal for applications where precise control is required.

It features two proportional outputs, PFM pulse frequency modulation for proportional control of Accepta’s electronic dosing pumps with adjustable set points and proportional band selectable for either one acid and one alkali-dosing pump.

Duty and assist acid pumps or duty and assist alkali pumps.

PWM pulse width modulation for proportional control solenoid valves as above.

Product Description
Accepta
P76-85
This is a high performance pH/mV panel mounted controller with two control points on/off, PFM for proportional control of dosing pumps or PWM for proportional control solenoid valves.
Alarm relay with delay timer and isolated 0 (4) -20 mA current output.
Accepta
P76-85-010
This is a high performance pH/mV controller with two current outputs for pH, and or temperature (oC).
Auto clean output with freeze and hold facility.
Accepta
MTP
This is a high performance pre-amplifier for Accepta P76-85 recommended when the electrode is more than 25m from the controller.

panel-mounted-controller

Accepta P73-35 - pH/mv Controller

The Accepta P73-35 is a high performance panel mounted pH /mV controller that features a very short case length of only 95mm making it ideal for mounting in small panels in confined spaces. It is an ideal replacement instrument when compact dimensions are required.

This controller also features a switched mode power supply 86 - 264 VAC and user selectable pH or Redox millivolt ranges.

Product Description
Accepta
P73-35
This is a high performance pH/mV controller located in a 96 x 48 Din enclosure.
pH measurement range 0 - 14.00 or 0 - ±1000 Mv.
Incorporates two control relays, an alarm relay with delay timers, logic input and an isolated 0 - 20 / 4 -20mA output mains supply by switched mode power supply 86 - 264 VAC.
Accepta
AK96-48
This is a high performance instrument door fabricated to IP55 suitable for the Accepta P73-00 range.

panel-mounted-controller-2Accepta P76-35

The Accepta P76-35 is a high performance panel mounted pH /mV controller that incorporates a larger digital display.

This controller also features a switched mode power supply 86 - 264 VAC and  selectable pH or Redox millivolt ranges.

Product Description
Accepta
P76-35
This is a high performance pH/mV controller incorporating a larger display panel.
Located in a 96 x 96mm Din enclosure.
Measurement range 0 - 14.00 pH or 0 - ±1000 mV with two control relays, an alarm relay with delay timers logic input and an isolated 0 - 20 / 4 -20mA output mains supply by switched mode power supply 86 - 264 VAC.
Accepta
AK96
This is a high performance instrument door fabricated to IP55 suitable for the Accepta P76-00 range.

Technical Support

If you require additional information or specialist technical support concerning our pH and Redox meters and controllers please contact Accepta's technical support team.

World Class Expertise

Accepta work with industry worldwide delivering practical, cost effective solutions to resolve complex problems. If you require technical assistance, or information about our water treatment chemicals and other speciality products, please contact our dedicated technical support team on:

+44 (0) 845 519 89 90 or complete our Technical Support form.

Expert Training

Develop your skills with our internationally recognised water and wastewater treatment training courses. Delivered by world leading industry experts and designed for engineers, facilities managers and environmental professionals... water treatment training.

Keep upto date with our extensive library of good practice guides, latest research, regulatory updates, news and more... knowledge base.

Custom Chemical Manufacturing

Accepta offer custom chemical manufacturing, specialist toll blending and white label production services for our own water treatment chemicals and client specific formulations to UK and international customers.

To discover how you could benefit from our environmentally sensitive, quality driven chemical manufacturing capabilities please call us on +44 (0) 161 877 2334 or contact us.

International Distributor Opportunities

Accepta's innovative, quality driven customer focused business model creates exciting global supply chain and distributor opportunities for established and ambitious businesses currently active within the water treatment, wastewater treatment and environmental services sectors around the world.

If you are interested in becoming an exclusive international distributor of Accepta water treatment technologies please click here to learn more.

bsi-ukas-14001-2004bsi-ukas-9001-2008british-association-for-chemical-specialitiesinvestors-in-people-iip  greater-manchester-chamber-of-commerce-member