Accepta’s range of high performance stainless steel grease traps have been developed to be robust, reliable and to significantly improve the performance of domestic, commercial and industrial drainage systems by minimising the problems caused by the unwanted accumulation of waste solids, fats, oil and grease.
Each Accepta grease trap is constructed from high quality stainless steel and incorporates an innovative stainless steel mesh system that acts to effectively filter out solid organic waste before it enters the drainage system, minimising its impact on drains, pipes, interceptors and wastewater discharge quality.
- Traps grease, oils, fats, food and kitchen debris
- Easy to operate, reliable, low maintenance
- Ideal for both new and existing installations
Accepta’s grease traps are available in a range of sizes and can be either installed free standing or wall mounted to suit both new designs and existing installations. Once our grease traps are installed they are designed to be low maintenance, giving years of reliable performance with minimum attention.
Accepta’s high performance grease traps offer a number of significant benefits including:
- Minimise disruption and drain cleaning call-out charges
- Better environmental performance - improved wastewater discharge quality
- High performance stainless steel mesh system to filter out soild organic waste
- Eliminate unwanted odours
- Easy to maintain - quick and easy to inspect and clean with quick release watertight lid and lift-out filter basket
- Durable corrosion free, high quality stainless steel (type 304) construction with fully welded seams for improved strength and durability
- Can be used either internally or externally
- Easy installation – uses standard “Multifit” connections
- 2 year warranty
Grease Trap Suitability
Accepta’s range of grease traps are suitable for most domestic, commercial and industrial applications including:
|Hotels and guest houses|
|Pubs, bars and cafes|
|Fast food restaurants and takeaways|
|Hospitals and healthcare facilities|
|Industrial process applications and many more…|
What Size Trap do I Need?
Accepta grease traps are available in a range of sizes to suit every application, from the compact Accepta GT100 for domestic use up to the extra high capacity GT1000 for large catering facilities and commercial food processors.
To select the correct grease trap for your needs use the diagram below, or contact Accepta technical support team for specialist advice.
|Small kitchens (10-50 covers)||Yes||Yes||Yes||Yes||Yes||Yes||Yes|
|Medium kitchens (50-100 covers)||Yes||Yes||Yes||Yes||Yes||Yes||Yes|
|Large kitchens (100-150 covers)||Yes||Yes||Yes|
|Very large kitchens (150+ covers)||Yes||Yes||Yes|
How do Accepta Grease Traps Work?
Accepta’s high performance stainless steel filtration system which is an integral component of each unit removes most solid matter from the wastewater before it enters the drainage system.
As the wastewater enters the trap, lighter grease, fats and oils separate and float on the water, whilst solid particles settle to the bottom of the filter cassette.
As the wastewater drains, it is drawn through the filter cassette, which helps to reduce any turbulence and filters out even more solid waste material.
The wastewater is then drawn up through the integrated air trap into the main drainage system.
The cleaning cycle will depend on the volume of material running through the filter. Cleaning operations should be carried out only when the trap is cold. We generally recommend that the filter is cleaned at the start of each working day, after the grease and fat deposits have solidified overnight.
The cleaning cycle for each trap depends on the volume of use. Cleaning should only be carried out at the start of the working day when system is cold.
The suggested cleaning procedure is as follows:
Unclip the lid, remove lid, wipe the lid clean and set aside.
Using a sieve skim out accumulated grease and fat.
Proceed to Stage 5 if using Accepta7141 (Grease Trap Cleaner) and pump dosing system.
Open low level drain valve (if fitted) and drain the unit.
Close low level drain valve (if fitted).
Lift out filter cassette (basket), empty and clean.
Proceed to Stage 7 if using Accepta 7141 and dosing system.
Flush out the unit with hot soapy water. DO NOT use bleach products if using Accepta 7141.
Refit the filter cassette (basket).
Replace the lid, clips, closing the side clips first, and then the clips at the pipe ends.
Automatic Dosing System
Accepta recommend that their stainless steel filtered grease traps are used in conjunction with Accepta 7141 and the specially designed dosing system.
Accepta 7141 significantly improves operational efficiency and has several significant benefits.
Either mains or battery operated, Accepta’s dosing system automatically dispenses a measured amount of Accepta 7141, either manually or automatically at preset times – normally after hours, when the grease and fat deposits have solidified.
The use of Accepta 7141 with the automatic dosing pump significantly accelerates the rate of grease/fat digestion helping to improve performance, reduce odours and the accumulation of grease, fats and oils in the system.
For further technical assistance concerning Accepta grease traps please contact Accepta's technical support team.