English Arabic Chinese (Simplified) French German Greek Italian Polish Portuguese Russian Spanish
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +44 (0) 161 877 2334

Cooling Water Treatment Back Plate Systems

Cooling Water Treatment - Back Plate Systems

Accepta’s high performance cooling water back plate systems have been carefully designed for use in most cooling water treatment applications including cooling towers.

Each cooling back plate systems is supplied as a complete unit ready for on-site installation and use. They are delivered fully pre-wired and factory assembled to allow rapid on-site installation.

Each back plate system will usually comprise a controller, PVC manifold with valves and sensors, bleed valve and dosing pumps as required by the cooling water control system. All systems are delivered fully pre-wired, pre-plumbed and factory tested to ensure quick, trouble free on-site installation.

System manifolds are all hydraulically pressure tested post manufacture.

Accepta’s back plate systems should be installed on the flow side of the circulating pump and piped to the cooling tower sump or point of low pressure within the cooling system to ensure a good flow of cooling water.

Where required, flow switches can be added to the manifolds to inhibit dosing and bleed under no flow conditions.

Cooling Water Back Plates

Product Description
Accepta
BT36-05-BPS
High performance cooling water treatment back plate system.
Comprises a single biocide timer and dosing pump.
0 - 6 l/hr against 6 bar.
Accepta
BT36-07-BPS
High performance cooling water treatment back plate system.
Comprises a dual biocide timer and 2 dosing pumps.
0 - 6 l/hr against 6 bar.
Accepta
ACW-1-BPS
High performance cooling water treatment back plate system.
Comprises a bleed and feed controller with 3 dosing pumps.
6 l/hr against 6 bar.
Additional equipment required Accepta CT-FI 20 0.75'' water meter.
Accepta
C36-45-BPS
High performance cooling water treatment back plate system.
Comprises a conductivity (TDS) controller with flow line conductivity cell and Accepta BSV 075 - 00 0.75'' solenoid valve.
Accepta
ACW-2-BPS
 High performance cooling water treatment back plate system.
Comprises a dual biocide, feed and bleed controller with 3 dosing pumps.
0 - 5 l/hr against 5 bar and 0.75'' solenoid valve.
Additional equipment required Accepta CT-FI 20 0.75'' water meter.
Accepta
MO-5-CT-CD-BPS
High performance cooling water treatment back plate system.
Comprises Accepta MO-5-CT-CD controller
Dual biocide, flow proportional feed and TDS bleed with 3 dosing pumps.
0 - 6 l/hr against 6 bar.
Accepta FL-310 cell and 0.75'' solenoid valve.
Additional equipment required Accepta CT-FI 20 0.75'' water meter.
Accepta
MO-5-CT-RH-BPS
High performance cooling water treatment back plate system.
Comprises Accepta MO-5-CT-CD/RH controller.
Single biocide, Redox controlled oxidising biocide dosing, flow proportional feed and TDS bleed with 3 dosing pumps.
0 - 6 l/hr against 6 bar.
Accepta FL-310 cell.
Accepta RES-1-QR ORP electrode and 0.75'' BSP solenoid valve.
Additional equipment required Accepta CT-FI 20 0.75'' water meter.
Accepta
MO-5-CT-RH2-BPS
High performance cooling water treatment back plate system.
Comprises Accepta MO-5-CT-CD/RH controller.
Single biocide, Redox controlled bromine dosing, flow proportional feed and TDS bleed with 2 dosing pumps.
0 - 5 l/hr against 5 bar.
Accepta FL-310 cell.
Accepta RES-1-QR ORP electrode and 2 x 0.75'' solenoid valves.
Additional equipment required Accepta CT-FI 20 0.75'' water meter/
Bromine tablet holders can be selected from Accepta’s range of tablet brominators.

Technical Support

If you require additional information or specialist technical support concerning our cooling water treatment back plate systems please contact Accepta's technical support team.

World Class Expertise

Accepta work with industry worldwide delivering practical, cost effective solutions to resolve complex problems. If you require technical assistance, or information about our water treatment chemicals and other speciality products, please contact our dedicated technical support team on:

+44 (0) 845 519 89 90 or complete our Technical Support form.

Expert Training

Develop your skills with our internationally recognised water and wastewater treatment training courses. Delivered by world leading industry experts and designed for engineers, facilities managers and environmental professionals... water treatment training.

Keep upto date with our extensive library of good practice guides, latest research, regulatory updates, news and more... knowledge base.

Custom Chemical Manufacturing

Accepta offer custom chemical manufacturing, specialist toll blending and white label production services for our own water treatment chemicals and client specific formulations to UK and international customers.

To discover how you could benefit from our environmentally sensitive, quality driven chemical manufacturing capabilities please call us on +44 (0) 161 877 2334 or contact us.

International Distributor Opportunities

Accepta's innovative, quality driven customer focused business model creates exciting global supply chain and distributor opportunities for established and ambitious businesses currently active within the water treatment, wastewater treatment and environmental services sectors around the world.

If you are interested in becoming an exclusive international distributor of Accepta water treatment technologies please click here to learn more.

bsi-ukas-14001-2004bsi-ukas-9001-2008british-association-for-chemical-specialitiesinvestors-in-people-iip  greater-manchester-chamber-of-commerce-member