Chlorine Dioxide (ClO2) Testing Kits

Chlorine Dioxide (ClO2) Testing Kits - Accepta's chlorine dioxide (ClO2) testing kits have been developed to allow engineers, water treatment professionals and non-technical personnel to perform a range of important water quality tests and analysis procedures "in-field", allowing real time data to be collected quickly and accurately.

Chlorine dioxide testing and analysis procedures have traditionally been performed using either iodimetric titration or colourimetric procedures, using DPD. However, neither test method is specific to chlorine dioxide, as all other oxidising agents react in a similar way.

Recent developments in testing and analysis technology have also seen the introduction of a colorimetric test method based on the bleaching effect of lisamine green under alkaline conditions. This method is however significantly more expensive than the traditional methods of testing. The cost of replacement reagents associated with this test method are also increased.

Accepta's Innovative Drop Test Kits

ClO2 Analysis

Overcoming these challenges, Accepta's innovative range of high quality, 'easy to use' drop test kits are specific to chlorine dioxide, they are extremely cost effective and simple enough to be used by either technical or non-technical operators.

Easy to Use?

Test results are obtained simply by multiplying the number of drops of reagent added to the sample to achieve the required colour change, by a predetermined factor provided in the instructions.

Please note that tests can be carried out without interference from bromine, chlorine, chlorite, chlorate, hydrogen peroxide, peracetic acid, or by any other oxidising species, or their organic complexes.

Analysis Equipment

Accepta offer a number of standard test kits, the performance of each being dependant on the required test range and specific sample conditions encountered.

Reference	Test Range	Description
Accepta 61313	0.3 - 24 ppm	Accepta 61313 is designed for the measurement of chlorine dioxide in system water with usage levels down to 0.3ppm, and an accuracy of 0.03ppm.
Accepta 61314	0.16 - 12 ppm	As Accepta 61313, plus increased sensitivity to achieve an accuracy in the region of 0.016ppm, or to achieve the accuracy of Accepta 61313 on a smaller sample.
Accepta 61315	0.3 - 600+ ppm	In addition to system water, Accepta 61315 also allows testing of chlorinedioxide concentrations produced either by the electrolysis of sodium chlorite, the acidification of sodium chlorite or stabilised chlorine dioxide.
Accepta 61316	0.16 - 600+ ppm	As Accepta 61315, plus increased lower end sensitivity, accuracy 0.016ppm.
Accepta 61317	0.3 - 600+ ppm	As Accepta 61315, plus reagents to neutralise acidic samples produced either by electrolysis or acidification of chlorites or stabilised chlorinedioxide stored at a low pH.
Accepta 61318	0.16 - 600+ ppm	As Accepta 61317, plus increased lower end sensitivity.
Total Oxidant		An additional kit is also available for the analysis of total oxidant levels in drinking water.

Additional Information & Technical Support

For further information, technical support and advice please call Accepta on +44 (0) 161 877 2334 or e-mail info@accepta.com. For additional products, specifications, product data and MSDS's please review our products pages.