Test Kits - Single Parameter Water Testing Kit

Single Parameter Test Kits - Simplicity is the key to Accepta's innovative single parameter test kits. These handy sized water test kits, which are based on the recognised 'drop test' method, are very simple to use, help reduce the hazards normally associated with similar testing procedures and, best of all, they are inexpensive and extremely cost effective.

Each test kit comprises two small plastic bottles, one inside the other. The inner bottle contains the chemical reagent required for the test; whilst the outer bottle acts as the 'test tube' to hold the water sample; simplicity itself.

How to Use Accepta's Single Parameter Test Kits

Take the reagent containing bottle from inside the larger test tube bottle.

Fill the now empty test tube bottle to the appropriate calibrated mark with the water sample.

Insert the reagent bottle top into the preformed hole in the top of the test tube bottle and then add the reagent drop by drop until a colour change occurs as instructed.

The test results are obtained by simply multiplying the number of drops of reagent added by a predetermined factor.

Test complete

Finally, clean out the test tube bottle; replace the reagent bottle inside ready for the next test.

Simple & Cost Effective

Accepta Kits

Accepta's single parameter test kits are currently available for the following tests:

Hardness (total)
pH
Iron
Phosphate (HR)
Bromine
Chlorine LR
Chlorine (HR)
Alkalinity (total)
Alkalinity P

Additional Information & Technical Support

For further information, technical support and advice please call Accepta on +44 (0) 161 877 2334 or e-mail info@accepta.com. For additional products, specifications, product data and MSDS's please review our products pages.